P2100 SD The P2100 SD micro dispensing system is intended for adhesive or other fluids of different viscosity levels. It dispenses in small dots or in a line with high accuracy. Shots are adjustable through a micrometer. The system inlet and outlet are fitted with Luer fittings to accept the syringe tube and syringe needle. The syringe tube has a special adapter to accept air for more control of the shot volume. The SAC1100 or CLC1100 controller controls the P2100 SD. Both controllers can also control standard P2100 modules. P2100 SD SPECIFICATIONS PUMP MODULE PISTON DIA. PRESETTABLE SHOT RANGE FLUID PRESSURE, MAX FLUID INLET (UNF) FLUID OUTLET (UNF) PPL0802 0.125 in 0.010 - .050 ml 400 psig. 10 - 32 10 - 32 PPL0804 0.250 in 0.08 - .400 ml 100 psig. 10 - 32 10 - 32 Repeatability : 99.5% Accuracy : 99.2% Viscosity : 100,000 cp (max) Stroke Adjustment : 0.5 in Operating Cycle (fixed) : Alumina Ceramic Accuracy : Polyethylene, 316SS, Ceramic, Viton, Teflon Repeatability : .001" resolution micrometer Pump Module Dimensions : 1 1/8 x 8 in Pump Module Weight : 2 lbs. Controllers : SAC 1100 CLC 1100 Repeatability is the measure of the consistency of shot volume delivery, obtained by calculating the ratio of any shot volume to the average shot volume of a particular pump stroke setting multiplied by 100. Accuracy is determined by comparing actual shot volume to the preset shot volume, calculated as the quotient of the actual shot volume to the preset shot volume, multiplied by 100. Data in website is based on tests performed using water as the pumping media. PATENT PENDING Teflon® and Viton® are registered trademarks of DuPont Dow Elastomers. P2100 SD FEATURES Pump module is easy to maintain and clean Autoclavable pump components Adaptable for remote operation Minimum dead volume for easy priming Purging with minimum effort Programmable, presettable shot volume Clean material cut-off Micrometer adjustable at .001 in resolution Relay or PLC controller abvailable To Order or for Additional Information: Call Toll Free: 1-800-575-5093 E-mail: pumps@emspacific.com Note: All information contained in this catalog is subject to engineering change without notice. | PRODUCT LINE | CONTACT INFORMATION | COMPANY INFORMATION | HOME