P4000 SPECIFICATIONS

P4000 SPECIFICATIONS

PUMP MODULE	PISTON DIA.	PRESETTABLE SHOT RANGE	FLUID PRESSURE, MAX	FLUID INLET TUBE DIA.	FLUID OUTLET TUBE DIA.
PR1608	0.5 in	0.5 - 3.5 ml	400 psig.	3/8 in	1/4 in
PR1616	1 in	3.5 - 12.5 ml	100 psig.	3/8 in	3/8 in

Valve Type	: Rotary
Viscosity	: 150,000 cp
Piston Stroke	: 1 in
Stroke Adjustment	: .001 Resolution Micrometer
Operating Cycle	: 60 cycles/min
Accuracy	: 99.9%
Repeatability	: 99.7%
Piston Material	: Alumina Ceramic
Wetted Material	: Polyethylene, 316SS, Ceramic, Viton, Teflon
Positive Pressure	: Minimum Effect
Pump Module Dimensions	: 2 x 17.5 in
Weight	: 6 lbs
Air Requirements	: 100 psi (max)
Electrical Requirements	: 110 VAC, 60Hz

Controllers	: SAC 1100
	CLC 1100
	CFC 1200

Repeatability is the measure of the consistency of shot volume delivery, obtained by calculating the ratio of any shot volume to the average shot volume of a particular pump stroke setting multiplied by 100.

Accuracy is determined by comparing actual shot volume to the preset shot volume, calculated as the quotient of the actual shot volume to the preset shot volume, multiplied by 100.

Data in website is based on tests performed using water as the pumping media.

PATENT PENDING

Teflon® is a registered trademark of Dupont.

Viton® is a registered trademarks of DuPont Dow Elastomers.

SEE FEATURES

To Order or for Additional
Information:

Call Toll Free:
1-800-575-5093

E-mail: pumps@emspacific.com

P4000 FEATURES

Pump module is easy to maintain and clean

Autoclavable pump components

Adaptable for remote operation