M2100 SPECIFICATIONS & FEATURES

M2100 SPECIFICATIONS

PUMP MODULE	PISTON DIA.	PRESETTABLE SHOT RANGE	FLUID PRESSURE, MAX	*FLUID INLET (NPT)	*FLUID OUTLET (NPT)
MPL0402-PV	0.125 in	0.010 - .050 ml	120 psig.	1/16 in	1/16 in
MPL0404-PV	0.250 in	0.08 - .200 ml	120 psig.	1/16 in	1/16 in

*10-32 UNF (optional)

Valve Type	: Check Ball
Viscosity	: 5,000 cp
Piston Stroke	: .25 in
Stroke Adjustment	: .001 Resolution Micrometer
Operating Cycle (fixed)	: 60 cycles/min
Accuracy	: 99.9%
Repeatability	: 99.7%
Piston Material	: Alumina Ceramic
Wetted Material	: Polyethylene, 316SS, Ceramic, Viton, Teflon
Pump Module Dimensions	: 1 1/8 in (dia.) x 3.7 in
Pump Module Weight	: 1.5 lbs.
Electrical Requirements	: 110 VAC, 60Hz
Max. Pumps Per System	: 10

Controllers	: SAC 2000
	CLC 2000

Repeatability is the measure of the consistency of shot volume delivery, obtained by calculating the ratio of any shot volume to the average shot volume of a particular pump stroke setting multiplied by 100.

Accuracy is determined by comparing actual shot volume to the preset shot volume, calculated as the quotient of the actual shot volume to the preset shot volume, multiplied by 100.

Data in website is based on tests performed using water as the pumping media.

PATENT PENDING

Teflon® is a registered trademark of Dupont.

Viton® is a registered trademarks of DuPont Dow Elastomers.

SEE FEATURES

To Order or for Additional
Information:

Call Toll Free:
1-800-575-5093

E-mail: pumps@emspacific.com

M2100 FEATURES

Pump module is easy to maintain and clean

Autoclavable pump components

Adaptable for remote operation